4000/110W

4000R/114RW

4100/216W

2100/513W

Outboards

Oiler System

Pricing

 

 

 

 

 

T&E Oil Lubrication System is included on all Outboard Pumps however is optional on all T&E Pumps. This eliminates greasing therefore reducing maintenance.

Part #: OL-001 (Click link for Parts Breakdown)

 

Installation and Operation of Oiler System

1) Hook up oil line from regulator to pump

2) Hook up air line from truck to oil reservoir

3) Fill oil reservoir with 50 synthetic transmission oil

4) Turn on air and adjust regulator to 80—90 psi and hold pressure for 10—15 minutes to purge air from bearing cap on pump

5) Shut off air and release pressure from reservoir. Note to see if air bubbles come back through lines from pump

6) Repeat steps 4) and 5) once more

7) Because of check valve in airline, relieve pressure through filler valve

8) Set pressure @ 20 - 25 psi.

Note:  When filling oiler be sure you are always able to see oil limit in the sight glass.

After 3 weeks/or if oil is being used; turn pressure down to 15 - 20 psi.

The oil system will likely use 1-1¹/₂ cups of oil monthly.