T&E Pumps Ltd.     P.O. Box 460   Consort Alberta Canada   T0C 1B0    Phone (403) 577-3825         

 
 Home  About Us  Products  Services  Troubleshooting  Contact Us
 
 
 
Pump Types

110W-OBF -    4" T&E straight through w/ 6" gears

110W-OBNF  Outboard with Nitrided Housing

110W-OBNTF Outboard with Nitrided housing and Teflon Seals

114RW-OBF -    4" T&E right angle w/ 7.5" gears 

216W-OBF - 4.5" T&E straight through w/ 7.25" gears

513W-OBF -   2" T&E straight through w/ 4" gears

Note: All T & E Pumps include the T & E Oil Lubrication System.            

Printable OB Spec Sheet Here.                                                                                

 

Choose an image to begin
 
                                                              

 Outboard Pump Features

T & E Outboard Pumps have an external front drive gear assembly that is timed so your internal gears do not touch therefore creating less wear. These pumps are superior when used where sand or abrasive liquids are a problem. T&E also builds skid units using our outboard pumps for facility use. These are made to order and require 4-6 weeks for delivery.

 

Outboard Pump Specs

Flange Type:  Steel Weld Flanges

Flow Rates:  see table below

Horsepower Requirements: 

PUMP TYPE

HYDRAULIC MOTOR

ELECTRIC MOTOR

114RW-OBF/110W-OBF

Up to 40 hp but effective @23-25

15-20 hp with 440 VFD

216W-OBF

40-60 hp required

20 hp with 440 VFD

513W-OBF

20 hp required

10 hp with 440 VFD

Inside Gear Type:  helical cut, nitrided gear cut from 4140 HTSR steel

Maximum Pump Pressure:  125 PSI

Maximum RPM:  750 RPM at the pump

Maximum Temperature:  285 degrees F

Outboard Gear Type: timing gears made of 4140 HT steel

Plumbing Requirements:  see table below

IMPORTANT

·All pumps on skid units are supplied with explosion proof motors unless otherwise stated or requested

·For optimum efficiency please notify us of your required RPM and flow rate so we may set up the belt drive properly

 

T & E Oil Lubrication System

The T&E Oil Lubricating System is included with all Outboard Pumps.

This eliminates greasing, thus reducing maintenance. 

Recommended operating pressure is 20-25 psi for use with 50 weight synthetic oil. 

Flowrates, Pump Speed & Plumbing

 

PUMP GEAR SIZE LIT/MIN m3/hour RPM RECOMMENDED PUMP SPEED 
114RW-OBF 5.125” x 7.5” 208.2 12.5 100 Recommended for use with 3” hose & fittings. pump
    1041 62.5 500 should be run between 700—750 RPM at the pump.
    1249.2 75 600 Pump Dimensions:  27” L x 13” H x 8” W
    1457.4 87.4 700  
    1561.5 93.7 750  
110W-OBF 5.850” x 6” 241.9 14.5 100 Recommended for use with 3” hose & fittings.  Run pump between 
    1209.5 72.6 500 700-750 RPM at the pump
    1451.4 87.1 600 Pump Dimensions:  25”L x 13”H x 8”W
    1814.2 108.9 750  
216W-OBF 5.850” x 7.25” 292.3 17.5 100 Recommended for use with min 4” hose & fittings on trucks and 4.5” hose
    1253.8 75.2 500 and fittings in facilities. Used for high volume displacement.  Run between
*max 50lbs pressure   1461.5 87.7 600 700-750 RPM at the pump.
For maximum efficiency   2192.2 131.5 750 Pumps Dimensions:  27”L x 13” H x 8”W
513W-OBF 5.850” x 4” 162 9.7 100 Recommended for use with 2” hose & fittings.
    810 48.6 500 Pump should be run at 750 RPM at the pump.
    972 58.3 600 Pumps Dimensions:  23”L x 13”H x 8”W
    1215 72.9 750  
 


 

Home About Us Products Services Troubleshooting Contact Us

 

 

Copyright © 2009 T & E PUMPS LIMITED
Canadian Patent # 2309238
US Patent # 6309199
Last modified: 03/04/2010