4000/110W

4000R/114Rw

4100/216W

2100/513W

Outboards

Oiler System

Pricing

 

 

 

 

 

 

 

 

 

  

 

Printable Spec Sheet Here.

Printable Pump Measurement Sheet Here.

Part Numbers- (Click the Model Number for a parts breakdown)

108W  6" T&E Cast Housing/Rubber Gears/Bushing Caps

110W  6" T&E Cast Housing/Steel Gears/Bushing Caps

110WN  6" T & E Cast Nitrided Housing/Steel Gears/Bushing Caps

110W-22 6" T&E Cast Housing/Steel Gears/Bushing Caps/22" Input Shaft

110WNT  6" T&E Cast Nitrided Housing/Steel Gears/Bushing Caps/ Teflon Seals 

110WT  6" T&E Cast Housing/Steel Gears/Bushing Caps/ Teflon Seals

Outboards

110W-OBF  Regular 110W with an outboard system on the front

110W-OBNF  110W with Nitrided housing and an outboard system

110W-OBNTF 110W with Nitrided housing/Teflon Seals and an outboard system

4000 Series Pump Features:

6" T&E cast housing with inlet & outlet bored to 4"

6" Rubber or Steel gears

Nitrided housing available for pumping acid

Also available with T&E Oil Lubricating System, and as an Outboard Pump (please note that rubber geared pumps are not available as outboard pumps).

4000 Series Pump Specs

Flange Type:  Steel Weld Flanges

Gear Type:  6" helical cut, nitrided gear cut from 4140 HTSR Steel

Horsepower Requirements:

Maximum Pump Pressure:  125 PSI

Maximum RPM:

• 750 RPM for Steel Gears (most pumps reach maximum efficiency at 700 RPM)

• 500 RPM for Rubber Gears

Maximum Temperature:

• 285 degrees F for Steel Gears

• 40 degrees F for Rubber Gears

Plumbing Requirements:  3" hose & fittings

 Flowrates: